Servis zařízení Baumüller
Zpět na stránku opravySeznam chyb
| Chybový kód | Název |
|---|---|
| 1 | BASS communication time monitoring |
| 2 | USS communication time monitoring |
| 3 | Cyclic data time monitoring |
| 4 | Demand data time monitoring |
| 5 | Incompatible software |
| 6 | Invalid boot source entry |
| 7 | Program branching error |
| 8 | Drive blocked |
| 9 | Incremental encoder 1, scaling error |
| 10 | EEPROM-to RAM copy error |
| 11 | Damaged boot data record header |
| 12 | Boot data record checksum error |
| 13 | Damaged primary data header |
| 14 | EEPROM too small |
| 15 | Error on data record save |
| 16 | Ambiguous converter type BKD/BKF (1-Q/4-Q) |
| 17 | Error ext. analog - digital converter |
| 18 | Unknown field power unit identifier |
| 19 | Field connection error (AC) |
| 20 | Armature power unit connection error (AC) |
| 21 | CCW rotating field at armature power unit |
| 22 | Phase failure at armature power unit |
| 23 | Microprocessor error 1 |
| 24 | Microprocessor error 2 |
| 25 | Microprocessor error 3 |
| 26 | Microprocessor error 4 |
| 27 | Microprocessor error 5 |
| 28 | Microprocessor error 6 |
| 29 | Microprocessor error 7 |
| 30 | External watchdog tripped |
| 31 | Internal watchdog tripped |
| 32 | RAM test error |
| 33 | Parameter conflict (P 071 / P 073) |
| 34 | Repeated negative actual armature current |
| 35 | No synchronisation |
| 36 | Firing pulse interval differs from specified value |
| 37 | Armature circuit open (a = aG and lA < 10 % of setpoint) |
| 38 | Mains frequency < 45 Hz |
| 39 | Mains frequency > 65 Hz |
| 40 | Field current monitoring (actual field current < 50 % field current setpoint) |
| 41 | P 072 out of range |
| 42 | P 213 / P 215 parameter conflict |
| 43 | Shortcircuit/overload at a digital output |
| 44 | Overspeed (n > P 501) |
| 45 | Tachogenerator/encoder failure or armature circuit open (time to trip 12 scan cycles / 40 ms at 50 Hz) |
| 46 | Tachogenerator/encoder polarity reversed (time to trip 12 scan cycles / 40 ms at 50 Hz) |
| 47 | Speed range error (P 257) |
| 48 | Torque change time exceeded (> 100 scans) |
| 49 | Unknown armature power unit identification (current) |
| 50 | Data record selection error (digital input functions 1-6) |
| 51 | Input current < 3.3 mA at 4 mA to 20 mA |
| 52 | Mains undervoltage P 010 < 0.8 x P 070 |
| 53 | Overcurrent TD1 (lA > 2x P 072) |
| 54 | Overcurrent TD2 (lA > 2x P 072) |
| 55 | Zero-current detector defective |
| 56 | Offset error armature current detector > 50 mV |
| 57 | Ambiguous data record change source |
| 58 | EEPROM empty |
| 59 | Parameter error in data record 1 (write error/value) |
| 60 | Parameter error in data record 2 (write error/value) |
| 61 | Parameter error in data record 3 (write error/value) |
| 62 | Parameter error in data record 4 (write error/value) |
| 63 | Parameter error in data record 5 (write error/value) |
| 64 | Parameter error in data record 6 (write error/value) |
| 65 | Error in ROM data record (no. 7) |
| 66 | Primary data parameter error |
| 67 | Armature power unit identification differs from EEPROM value |
| 68 | Data record change: Data record does not exist |
| 69 | Field power unit differs from EEPROM value |
| 70 | Option board does not respond |
| 71 | Illegal value in P 072 / P 074 in data record 1 |
| 72 | Illegal value in P 072 / P 074 in data record 2 |
| 73 | Illegal value in P 072 / P 074 in data record 3 |
| 74 | Illegal value in P 072 / P 074 in data record 4 |
| 75 | Illegal value in P 072 / P 074 in data record 5 |
| 76 | Illegal value in P 072 / P 074 in data record 6 |
| 77 | Illegal value in P 079 in data record 1 |
| 78 | Illegal value in P 079 in data record 2 |
| 79 | Illegal value in P 079 in data record 3 |
| 80 | Illegal value in P 079 in data record 4 |
| 81 | Illegal value in P 079 in data record 5 |
| 82 | Illegal value in P 079 in data record 6 |
| 83 | EEPROM write time exceeded |
| 84 | Primary data checksum error |
| 85 | Checksum error in data record 1 |
| 86 | Checksum error in data record 2 |
| 87 | Checksum error in data record 3 |
| 88 | Checksum error in data record 4 |
| 89 | Checksum error in data record 5 |
| 90 | Checksum error in data record 6 |
| 91 | Undefined field bus card status |
| 92 | Field bus error |
| 93 | Field bus setpoint/actual value configuration error |
| 94 | P 657 / P 658 parameter conflict |
| 95 | Motor reached switch off temperature channel 1 ( motor temperature > P543 ) |
| 96 | Motor reached switch off temperature channel 1 ( motor temperature > P546 ) |
| 97 | Disconnection of motor temperature sensor channel 1 (X8:1 and X8:2 board 3.0043) |
| 98 | Disconnection of motor temperature sensor channel 2 (X8:4 and X8:5 board 3.0043) |
| 99 | Short circuit of motor temperature sensor channel 1 (X8:1 and X8:2 board 3.0043) |
| 100 | Short circuit of motor temperature sensor channel 2 (X8:4 and X8:5 board 3.0043) |
| 101 | Cable break temperature sensor power unit |
| 102 | Short circuit temperature sensor power unit |
| 103 | Power unit limit temperature exceeded (P112 = 1) |
| 104 | Error reaction freely definable error (P730 ^ 0) |
